Before we start we need to know if you already know Slide Therm? If your answer is NO, you must first visit the product page here! , where we detail this new and very useful product designed exclusively by Cargotrackgroup.
Now that you know a bit about what it is about, we are going to detail how easy it is to install Slide Therm inside a truck.
Slide Therm It is designed to be able to achieve an optimal separation of temperatures and to maintain the cold chain in the refrigerated transport of food or medicine. It is the most versatile thermal separator on the market which you can install easily and in less than a minute, and its light weight means that a single operator can handle it to load and unload goods. Slide Therm and its slide-in function slide to facilitate unloading or urban delivery tasks.
It consists of 3 simple steps:
Step 1: BAR REGULATION The Cargobarr Fast automatic loading bar allows us to adjust the ideal height to adjust the Slide Therm. For this, it has a simple button system, the same that when pressing the height can be adjusted. This step is recommended to be done only once (the first time after receiving Slide therm). The height should be adjusted leaving a space of 2 to 4 centimeters from the ceiling.
Step 2: JOINT / PLACEMENT OF BAR WITH SLIDE You will receive the Cargobarr Fast bar and the Slide Therm blanket disassembled, so you must join them using a screw as shown in the image below.
Step 3: PLACING ON THE TRUCK Once you have adjusted the height and attached the bar with Slide Therm, it is time to place it inside the truck, for this you must manipulate from the bar placing it in the center of the box and in a straight position from the floor to the ceiling. When you are sure that it is centered and straight, activate the blue lever of the Cargobarr Fast by pulling and releasing until it collides with the bar and the gas piston is activated; this will take care of pushing up and sealing the Slide Therm with the roof of the box.
This will be it, you have already created 2 spaces with different temperatures on the same truck.
For when you do not need to use Slide Therm, it is not necessary to completely disassemble it since due to the little space it occupies you can deactivate the Cargobarr Fast bar and place the Slide Therm attached to one of the walls of the van (activating Cargobarr Fast) as shown. the following image.
Here is a video where you can see this installation process of Slide Therm step by step: