Equipped with wheels and small like a pallet truck, they are involved in many thousands of loading and unloading operations every day. The aluminum profile used in the manufacture of AOS ramps is perfect for this type of equipment due to its hygrip non-slip perforated surface. The perforations allow water and snow to drain very easily from the tread, providing excellent traction for both pedestrians and equipment, regardless of the weather.
There is the option of equipping the ramps with safety curbs, and there is also the option for them to be foldable. To request a ramp budget, it is necessary to inform the existing height of the floor where the ramp will rest on the ground where it will rest. It is important to inform if there is a space to store the ramp, and its measurements. and finally, the load that the ramp must bear must be facilitated.
The length of the ramp is calculated with an inclination angle of 30%. Working with angles greater than 30% is not recommended. When requesting the ramp, it is important to take into account the means of the doors, rear and / or side doors, in the case of a van. It is also very important to know the place where you will keep these ramps, if it will be inside the van, under the chassis, in your warehouse, etc ...
There are many ramp options that will be suitable for work but it is also important that they are easy to manipulate.